Mold Removal Expert: Costs, Reviews & Austin's Top 5 Pros

If you’re seeing spots on drywall, smelling a musty odor, or dealing with a recent leak, time isn’t on your side. Mold takes hold quickly after water damage, and while a tiny, surface patch can be DIY, anything larger, hidden, or tied to your HVAC calls for a certified mold removal expert. In Austin’s heat and humidity—plus surprise storms and burst pipes—the right pro protects your health, stops the spread, and saves materials you’d otherwise have to tear out.

This guide cuts the guesswork: what drives mold remediation costs in Austin, which credentials matter (IICRC certification, licensing, insurance), and how to read reviews that separate hype from results. Then we compare the city’s top five providers—service areas, response times, strengths, pricing transparency, and how to get a same-day estimate—starting with local Water Damage Repair Tech. Use it to choose confidently and get your home back to normal without paying for work you don’t need.

1. Water Damage Repair Tech (Austin, TX)

A local, homeowner-first mold removal expert that handles the full emergency arc—from water extraction and drying to mold remediation and build-back prep. Their goal: stop spread fast, save materials, and restore safely.

Overview and specialties

Water Damage Repair Tech provides 24/7 water cleanup, targeted mold remediation, storm damage cleanup, and interior demolition for build-back. As a local Austin team, they focus on rapid containment, drying, and safe removal to reduce tear-out.

Certifications, licensing and insurance

Technicians are IICRC certified in water damage restoration and mold remediation. The company is Licensed & Bonded for storm work and Fully Insured for interior demolition, aligning methods to industry standards.

Response time and coverage area

Expect a 30-minute emergency response in most cases. Coverage spans Austin, Round Rock, Pflugerville, Brushy Creek, Cedar Park, Hutto, Georgetown, Kyle, and Leander—ideal for same-day assessments across the metro.

Pricing and estimates

They offer free, itemized estimates and scope work to what’s necessary. If a situation is minor (e.g., under ~10 sq. ft. per EPA guidance), they’ll advise when DIY cleanup is reasonable.

Reviews and reputation

Homeowners consistently highlight fast arrivals, clear communication, and careful containment that keeps living areas usable. Positive testimonials also note respectful crews and tidy job sites.

Ideal for

Great fit if you need one contractor to handle extraction, drying, and mold remediation seamlessly—especially for urgent leaks, storm events, or projects needing demo to prep for rebuild.

How to get started

Call their 24/7 line to book a same-day inspection. Share photos or a quick video; an IICRC tech will assess, moisture-map, set containment, and review an on-the-spot plan and estimate before work begins.

2. SERVPRO of Hyde Park / Central Austin

A well-known franchise backed by national resources, this SERVPRO location offers around-the-clock help for water, moisture, and mold problems with standardized processes and equipment.

Overview and specialties

SERVPRO provides 24/7 mold containment, remediation, and restoration, often paired with water extraction and structural drying to stop spread and prevent regrowth. Their team can coordinate multi-step projects from initial mitigation through cleanup.

Certifications, licensing and insurance

Ask for confirmation of IICRC-aligned procedures for mold remediation and drying, and verify Texas licensing and general liability/workers’ comp insurance. This ensures work follows recognized industry guidance and protects your home.

Response time and coverage area

With 24/7 dispatch, SERVPRO aims for prompt on-site assessments and stabilization. The Hyde Park/Central Austin franchise serves central Austin and nearby neighborhoods for fast mobilization.

Pricing and estimates

Expect a written scope after inspection. Costs vary by square footage, materials removed, and containment complexity; industry averages run about $10–$25 per sq. ft., with typical projects $1,200–$3,750, and whole-home cases higher. For very small areas (roughly under 10 sq. ft.), the EPA notes many homeowners can DIY safely.

• Free visual estimate: Common for initial scoping

• Insurance-friendly documentation: Photos, moisture logs, and scope

Reviews and reputation

As a national brand, reviews often highlight quick arrival and thorough containment; experiences can vary by crew. Check recent, local feedback and look for jobs similar to yours.

Ideal for

Homeowners who want a big-brand, 24/7 response with standardized processes and the capacity to handle water plus mold in one call.

How to get started

Call their emergency line for a same-day assessment. Share photos and access notes; request a written, itemized scope before work begins, including containment plan and drying goals.

3. The Steam Team (Austin)

If you’re considering The Steam Team for a mold issue in Austin, treat the first call like a quick interview. Your goal: confirm they’ll act as a true mold removal expert—control moisture, contain the area, remove contamination safely, and document the dry-down so mold doesn’t return.

Overview and specialties

Ask whether their team handles the full sequence: water extraction, structural drying, mold containment/removal, and disposal of impacted porous materials. Clarify that they’ll identify and fix the moisture source before remediation to prevent a repeat.

Certifications, licensing and insurance

Request proof of IICRC training for water/mold work and current Texas-appropriate licensing, plus general liability and workers’ comp. This helps ensure recognized methods and proper homeowner protection during remediation.

Response time and coverage area

Confirm same-day or 24/7 availability for Austin addresses and nearby suburbs, and ask about after-hours mobilization. Fast containment and drying within hours of discovery limit spread and reduce demolition.

Pricing and estimates

Look for a written, itemized scope with containment plan, removal areas, HEPA filtration, and post-cleaning verification. Typical industry ranges run about $10–$25 per sq. ft., with many projects around $1,200–$3,750; per EPA guidance, very small spots (under ~10 sq. ft.) can often be DIY.

Reviews and reputation

Scan recent, local reviews for specifics: on-time arrival, clean containments, clear communication, and successful post-remediation verification. Favor jobs that resemble your materials (drywall, cabinets, crawlspace).

Ideal for

Homeowners who want one vendor to manage water mitigation and mold remediation in one coordinated plan—verify they provide both and will document moisture readings.

How to get started

Call for a visual assessment. Ask for a moisture map, containment design, equipment list (HEPA/negative air), and a written estimate before work begins; request daily drying logs and final clearance documentation.

4. Blackmon Mooring & BMS CAT (Austin)

When you call Blackmon Mooring & BMS CAT for a mold concern, treat the first visit as a technical scoping session: confirm they’ll track down the moisture source, set hard containment, run HEPA filtration/negative air, and remove contaminated materials safely.

Overview and specialties

Ask whether their team manages the full workflow—water extraction, structural drying, mold containment/removal, and debris hauling—so you’re not left coordinating multiple vendors or risking re-growth.

Certifications, licensing and insurance

Request proof of IICRC training for water damage and mold work, plus current Texas-appropriate licensing, general liability, and workers’ compensation. This protects you and ensures recognized remediation methods.

Response time and coverage area

Confirm 24/7 availability for Austin addresses and nearby suburbs, and ask typical on-site arrival windows for emergencies. Early containment and drying within hours can significantly reduce demolition.

Pricing and estimates

Expect a written, itemized scope after inspection. Professional remediation often runs about $10–$25 per sq. ft., with many projects in the $1,200–$3,750 range; whole-home cases can be higher. Per EPA guidance, very small areas (under ~10 sq. ft.) can often be DIY.

Reviews and reputation

Scan recent, Austin-specific reviews for punctuality, clean containments, daily moisture logs, and successful post-remediation verification. Favor projects matching your materials (drywall, cabinets, crawlspace).

Ideal for

Homeowners seeking one contractor to coordinate water mitigation and mold remediation with insurance-ready documentation and clear communication from start to finish.

How to get started

Call for a same-day visual assessment. Ask for a moisture map, containment plan, HEPA/negative air equipment list, daily drying targets, and a clear, written estimate before work begins.

5. Green Home Solutions of Austin

Green Home Solutions positions its teams as a mold removal expert focused on addressing the root cause of growth and improving indoor air quality. Treat your first call as a technical consult to confirm they will both remediate safely and prevent recurrence by fixing moisture issues.

Overview and specialties

Ask whether their Austin team handles end-to-end service: moisture/source detection, hard containment, removal of contaminated materials, HEPA filtration/negative air, and post-cleaning verification. Their brand emphasizes getting to the root of the problem and restoring a healthier indoor environment.

Certifications, licensing and insurance

Request proof of IICRC training for water/mold work, plus current Texas-appropriate licensing, general liability, and workers’ comp. Verified credentials ensure recognized methods and proper homeowner protection.

Response time and coverage area

Confirm same-day or rapid scheduling for Austin and nearby suburbs, including after-hours mobilization for active leaks. Early containment and drying within hours help limit spread and reduce demolition.

Pricing and estimates

Expect a written, itemized scope after inspection. Industry averages typically run about $10–$25 per sq. ft., with many projects $1,200–$3,750; whole-home cases can be higher. Per EPA guidance, very small areas (under ~10 sq. ft.) can often be DIY if handled safely.

Reviews and reputation

Check recent, Austin-specific reviews for clear communication, clean containments, source correction, and successful post-remediation verification. Favor jobs that mirror your materials and room types.

Ideal for

Homeowners who prioritize indoor air quality and want remediation tied to moisture-source correction so mold doesn’t return.

How to get started

Call for a visual assessment. Ask for a moisture map, containment plan, HEPA/negative air equipment list, daily drying targets, and a written estimate with photos/moisture logs and final clearance documentation before work begins.

Next steps

Now that you know costs, credentials, and Austin’s top providers, act fast—mold spreads quickly after a leak. Shortlist two or three pros, request same-day inspections, and compare written scopes—not just price—covering containment, safe removal, HEPA/negative air, and dry-down. For tiny areas (under ~10 sq. ft.) DIY can work; anything bigger or near HVAC needs a pro. Typical pro jobs run about $1,200–$3,750 ($10–$25 per sq. ft.).

Before you call, prep:

• Photos/video and leak timeline

• Rooms/materials affected

• Source fixed or active

• Health concerns and HVAC status

Need help now? Get a 24/7, 30-minute response and a free estimate from Water Damage Repair Tech.